Whirlpool Washer - F32 Error Code

Pressure switch failure detected.

Meaning

Pressure switch failure detected.

The F32 error indicates that the washer’s pressure switch is not responding correctly. On Whirlpool Cabrio and HE top‑load washers, the pressure switch monitors water level using an air hose connected to the tub. If the switch does not open or close at the correct pressure, or if the hose is blocked or leaking, the washer cannot determine water level and triggers F32. This error is common when detergent residue clogs the pressure hose or when the switch diaphragm fails.

Symptoms

  • Washer overfills or underfills
  • Washer stops during sensing
  • F32 appears early in the cycle
  • Unexpected draining during fill

Causes

  • Blocked or kinked pressure hose
  • Loose hose connection
  • Faulty pressure switch
  • Air dome clogged with residue
🔧

Step-by-Step Fixes

  • Inspect the pressure hose for kinks or blockages.
  • Ensure the hose is firmly connected at both ends.
  • Clean the air dome on the tub.
  • Replace the pressure switch if readings are inconsistent.
⚠️

Safety Notes

  • Disconnect power before removing the console or switch.
📋

Applicable Models

Show Models
  • WTW6200VW
  • WTW6300WW
📁

Related Pages

📁

Other Whirlpool Washer Error Codes

Show All Error Codes

Model-Specific Notes

On early Cabrio models, the pressure switch is highly sensitive to detergent residue buildup, making F32 a frequent maintenance issue.

Disclaimer

The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.

Copyright 2026. All rights reserved.