Frigidaire Washer - E8C Error Code

The washer detected a motor overcurrent condition.

Meaning

The washer detected a motor overcurrent condition.

The Frigidaire E8C error code indicates that the washer’s motor is drawing too much current. This is typically caused by overload, mechanical binding, or a failing motor. Laundry centers use a simplified motor control system that shuts down immediately when overcurrent is detected.

Symptoms

  • Washer stops during wash or spin
  • Drum rotates slowly or not at all
  • E8C appears during acceleration

Causes

  • Overloaded drum
  • Worn or seized bearings
  • Failing motor
🔧

Step-by-Step Fixes

  • Reduce load size.
  • Inspect drum bearings.
  • Test motor windings.
⚠️

Safety Notes

  • Disconnect power before servicing the motor.
📋

Applicable Models

Show Models
  • FFLE3911QW
  • FLCE7522AW
📁

Related Pages

📁

Other Frigidaire Washer Error Codes

Show All Error Codes

Model-Specific Notes

On FFLE units, E8C often appears when the drum bearings begin to seize.

Disclaimer

The information provided on this page is for educational and informational purposes only. Repairs involve electrical, mechanical, and water-related risks. Always follow manufacturer instructions and consider contacting a qualified technician for diagnosis or repair.

Was this page helpful?

Copyright 2026. All rights reserved.